The Steps we go through to make you a shirt here at the shop.

To show you how hands on we are with every shirt and every printing project.

We print with a very traditional silk screening method that we first learned over 20 years ago.

#1 - Cut the 2" X 2" X 8' lumber into 20" + 24" pieces w/ 45's on each end

#2 - Build the Frame w/ Frame Nailer & Wood Glue (in our custom frame jig) (dry for 24 hrs)

#3 - Strech the Mesh on the Frame in our custom built meshing jig

#4 - Coat Photo Sensative Emulsion on the Screen

#5 - Dry in Dryer Vault for 30 Minutes

#6 - Print out Negative of Design (1 screen for each color)

#7 - Expose Screen for 10 min in UV Exposure Unit

#8 - Wash screen in wash booth with warm water & let dry

#9 - Tape off perimeter of bottom of screen

#10 - Place in one of the heads on the press - line up & set up palate

#11 - Coat screen with ink

#12 - Do test print on scrap fabric & heat set to check temp settings

#13 - Pull & Prep shirts to begin print run

#14 - Fold-em, Tag-em & Bag-em 

# 15 - then maybe a quick photo shoot to add to the product listing in our shop. 

Enjoy!